SPECIAL-ORDER | 3-4 Weeks
Tinted Glass-Ceramic Fascia
Spread heat evenly across any area while minimizing light emission.
Elegantly understated design that blends into nearly any outdoor environment.
Enjoy reliable heating for years to come thanks to durable stainless steel construction.
Tight Space Versatility
Place these compact heaters virtually anywhere due to minimal vertical clearance requirements and a wide range of wall, ceiling and flush-mounting options.
Precise Directional Heating
Accurately alter heat coverage as required with a simple bracket adjustment.
Set and forget
Simple and easy to use, with single-switch activation and smart system compatibility.
|Black Part Number
|White Part Numer
|Approximate area heated
||220-240V – A.C. – 50/60Hz – 9.6A
||220-240V – A.C. – 50/60Hz – 14.2A
||33” x 7” x 2″
||50.2” x 7” x 2”
|MINIMUM FLOOR CLEARANCE
||WALL 72” | CEILING 96”
||WALL 72” | CEILING 96″
||Brushed stainless steel 304
1) Must only be installed by a licensed technician. Must complete “Pre-Installation Checklist” before installing
2) The temperature will not exceed 65°C above the ambient temperature at specified distances. Please consult material manufacturer for temperature ratings and suitability. Bromic Heating takes no responsibility for material compliance.
3) Installation must be performed in accordance with AS5601 installation code (or relevant standard) and must comply with any additional jurisdictional requirements. Bromic takes not responsibility for incorrect or non-compliant installations
REMOTES & MOUNTING:
We have 3 remote options that are compatible with the Tungsten Electric series. The in-built radio transmitter offers control from up to 100ft away and is entirely portable, although it can be easily mounted with double-sided adhesive due to its light weight or with screw provisions within the case.
This switch supplies power to two separate circuits, enabling either on or off functionality of up to two electric heaters.
This remote allows dimming of 2 electric heaters, by adjusting the percentage output in increments of 1%. Present outputs of 25%, 50% & 75% are also available as buttons on the controller.
This controller offers complete comfort control on a grand scale. It can adjust an 6 heaters from a single point and is a must for larger venues.
Bromic Heater Recess Kits
Seamlessly integrate your units with these unique recess kits which permit flush-mounting in roof cavities.
Bromic Heating Suspension Poles
Space units down to an effective height in higher-ceiling applications where wall-mounting may not be appropriate.